Recovery Tank Rinse Procedure
- Drain the Recovery Tank in accordance with local laws.
- Connect a Supply Hose (garden hose) to the Rinse System Inlet Valve
- Turn water on at the faucet.
- Open Recovery Tank Drain Valve.
- Open the Rinse System Inlet Valve.
- Allow the Recovery Tank Rinse System to rinse/flush the tank out for the desired amount of time, usually 3 to 5 minutes.
NOTE: To flush the bottom of the tank more thoroughly, close the Drain Valve and allow the Recovery Tank to fill with a few inches of water and reopen the valve.
Important: Do not allow the Rinse System to fill the Recovery Tank, as it will overflow the tank.
- Once Rinse Procedure has been completed:
- Turn water off at the faucet.
- Close the Rinse System Inlet Valve.
- Disconnect the Supply Hose (garden hose).
- Once remaining water has been drained from the Recovery Tank, close the Drain Valve.
Warranty Coverage
See Warranty Booklet for complete coverage details and limitations.
About Us
The Butler Corporation is a family-owned American business, providing factory direct sales, service and support to thousands of cleaning and restoration professionals in all fifty states, as well as, Canada, Bermuda, Cayman Islands, Puerto Rico, St. Maarten and various U.S. government agencies worldwide.
"The Butler System is especially appreciated by customers who work in extreme conditions, operate their business in remote locations or where dependable local service is not available."
When you invest in a Butler System you do so knowing with confidence that you will always receive factory direct service and support.
